BENEFITS OF THE BIOCEPTOR
- Utilises the traditional principles of entrapment and retention alongside the natural process of bioremediation.
- The combined technologies create a highly effective environment, perfect for permanent degradation of FOG.
- Held within the F.I.T unit bacteria forms into biofilms and breaks down the captured FOG.
- Biofilms also populate the drain lines downstream from the F.I.T unit providing a safety net of protection for drains.
- Less need to open the F.I.T unit, lowering the associated hygiene risk.
- The GreasePak dosing module is approved by the British Board of Agrément (BBA).
- The F.I.T unit is certified to ASME A112.14.3 and PDI G-101.
- Helps satisfy legislation and building regulations by providing an effective means of grease removal.
- Makes it even easier for food service outlets to meet best practise advice.
- The dosing module is a simple design, few working parts –trouble free!
- Bio-fluid refills are easy to store, handle & change.
- Eco-friendly, uses no harsh chemicals.
- Bio-fluid doses automatically – so the operator doesn’t need to remember.
- BioCeptor’s F.I.T unit is highly efficient at capturing FOG, with an average efficiency rating of 95.6%.Smaller than a standard grease trap due to flow control technology.
- Ease of disconnection using the supplied Quick Disconnect kit.
- Together with the lightweight nature of the F.I.T unit this means it can be completely removed from situ.
- The floor, wall and local area can be completely and hygienically cleaned, reducing risk and maximising safety.
- Easy to remove, mechanical lid fittings for engineers to access tank – no special tool needed.
- Made from high strength injection moulded high-density polyethylene.
- Stylish, rounded modern design – no sharp corners for organic waste to collect.
- Quick disconnect cleaning kit –designed for easy cleaning and with hygiene in mind.
- All materials are recyclable.
- 10 year warranty on the tank and lid.
- Simple to install, supplied with universal fittings (R to L or L to R).
- Air tight chamber with sealed lid. Reduced Odours / Infestation risk.
- Optimised inner working design to maximise the retention of FOGs.
- Supplied with four adjustable levelling feet, which can help compensate for uneven floors and can help to create a flow fall through the F.I.T unit if required
The BioCeptor is a combined system designed to retain and breakdown Fats, Oils and Grease (FOGs) to prevent them from entering the drainage system.
- Combined system designed to retain and breakdown Fats, Oils and Grease (FOGs) to prevent them from entering the drainage system.
- BioCeptor FOG Intercept and Treatment (F.I.T) unit works in conjunction with the GreasePak bio-fluid dosing module.
- BioCeptor’s F.I.T unit is highly efficient at capturing FOG, with an average efficiency rating of 95.6%.
- Utilises the traditional principles of entrapment and retention alongside the natural process of bioremediation.
- The combined technologies create a highly effective environment, perfect for permanent degradation of FOG.
- Designed using flow control technology, allowing the F.I.T unit to be much smaller than a standard interceptor.
- Helps satisfy legislation and building regulations.
- 10 year warranty on the tank and lid.
- Simple to completely remove from situ to clean floors, walls and surrounding areas.
- Easy to remove baffles to facilitate easy cleaning and maintenance.
- Reduced frequency of maintenance/servicing due to the powerful bio-fluid degrading FOG within the F.I.T unit.
- Easy to remove, mechanical lid fittings for engineers to access tank Ð no special tool needed.
- Stylish, rounded modern design – no sharp corners for organic waste to collect.
- Supplied with four adjustable levelling feet.